Bar Instruments

Bemonsteringsmaatscheppen

Stainless Steel 316 Sampling Scoop Available in Various Capacity Sizes To ensure the highest possible purity and the correct volume of samples, BAR Instruments has developed a series of stainless steel sampling scoops. In practice, plastic scoops are often used. A disadvantage of these scoops is that they are poorly resistant to sunlight and require frequent replacement. Stainless steel is particularly recommended over thermoplastics when sampling for volatile and non-volatile organic compounds. Due to stricter sampling standards, contamination of microplastics is undesirable, and this is therefore not an issue with these stainless steel scoops. All sampling scoops are made entirely of 316 stainless steel and are suitable for both left- and right-handed users. Available volumes are 500, 250, and 125 ml. To ensure the most accurate measurement, the scoops are designed so that the correct volume is available just below the spout. The measurement indication is therefore on the underside of the spout; varying the volume is also possible. The interior has a smooth finish, minimizing contamination and making it easy to clean. The volume in milliliters (ml) is indicated on the handle of the measuring scoop. The shape of the handle and the grip are designed to allow easy mixing in a container, without coming into direct contact with the medium to be sampled. All stainless steel sample scoops are provided with a laser-etched company name so that it remains a unique product for you. Advantages: • Wear-resistant • No contamination by detaching plastics • Lightweight • Various volumes of sample scoop • Handle length 450 mm (optional: custom lengths) • Stainless steel 316 • According to NEN 66000-1 • Also suitable for laboratory use

Draagbaar clamp-on flow en energie meter

2025 The Dynasonics DXN-5P is a portable, non-invasive ultrasonic flow and energy meter that helps quickly diagnose flow and process conditions. The flow meter is easily clamped to the outside of the pipe and measures flow from the outside of the pipe through the wall using two ultrasonic sensors. The DXN-5P automatically selects the optimal measurement method—transit-time or Doppler—depending on the fluid conditions. This allows for reliable measurement of both clean liquids (transit-time) and liquids containing entrained air, gases, or suspended solids (Doppler). Combined with RTD temperature sensors, the DXN-5P can also measure thermal energy or mass flow. Ideal for achieving energy savings by performing pre- and post-measurement measurements. Portable flow measurement technology: The Dynasonics DXN-5P is a true hybrid ultrasonic flow meter that automatically switches between transit-time and Doppler technology depending on the process conditions. By monitoring both signals simultaneously, the user can quickly determine if air, sand, or dirt is present in the pipe. The DXN-5P is a powerful tool for analyzing, verifying, and logging flow and energy. Whether verifying an existing meter or conducting longer measurement campaigns. Key Features • Identify leaking valves, airlocks, trapped air, or sediment that can reduce efficiency or damage process equipment. • Easy Installation • The flow meter features a one-person installation. Attach the sensors to the outside of the pipe without draining or process interruption. • Extensive Connectivity • Using Bluetooth, the DXN-5P pairs with the SoloCUE® Flow Device Manager app so you can wirelessly monitor flow measurements while controlling other equipment.

Vlotter voor riool water met intern gewicht

De MegaMaster™ een betrouwbare vlotter. Om de hoogte van vloeistoffen te regelen is een vlotter een eenvoudige en goedkope oplossing. Nu zijn er vlotters in allerlei soorten en maten, de eenvoudigste zijn voor schoon water applicaties, grondwater en drainage. De betere zijn geschikt voor industriewater of rioolwater en met name bij locaties waar vervuiling van de vlotter voorkomt. De MegaMaster™ is een robuuste vlotter gemaakt van materialen die weinig of geen vervuiling kent. Omdat de vlotter normaal onderwater is en alleen bij het schakelpunt boven het water komt, hij kantelt doormiddel van het interne gewicht, is van aangroei nauwelijks sprake. En is daarmee een betrouwbare niveauregeling met nauwelijks onderhoud behoefte. Door het kleurverschil van de boven en onderzijde van de vlotter is eenvoudig te zien wat zijn drijfpositie is. Het materiaal van de vlotter is high impact polypropyleen en de flexibele kabel is van CPE een chloorpolyethyleen soort met hele goed chemische en hitte eigenschappen. Eigenschappen: Min spanning 4VDC 1mA Max spanning 230VAC 1 A Kabellengte 5, 10 en 20 meter, 3 x 0,75mm2 Schakelaar met unieke goud contacten NO/NC contacten 2 jaar garantie

Automatic Wastewater Sampling equipment

S320H stationary outdoor sampler The S320H is a cooled sample cabinet for outdoor installation. This sampling cabinet provides frost protection for the sample.   As with all Aquamatic sampling equipment, it also has the reliable Aquacell module with the fixed 50 ml volume tube. Properties: Case made of galvanized steel with polyester powder coating Meets NEN 6600-1 Lockable above and below cupboard Easy access for daily maintenance Choice of various sample bottles or barrels No need to open the cooler section during maintenance Sample temperature monitoring 0 ° C to 5 ° C

Point Orange Datalogger

Point Orange with analog and digital I/O The Point Orange RTU (remote telemetry unit) is a data logger of the new generation of Metasphere data loggers, called Point Color. A series of telemetry units, developed to collect data from a variety of different sensors with a mA, volt, SDI-12, Modbus or digital input. Features Analog inputs Volt and mA Digital inputs Communication with modbus and SDI-12 sensors Connect up to 5 sensors Remote firmware upgrade Internal battery life 5 years and more Software DNP3, Medina and WITS DNP3 Masters 4 GB memory Optional; ATEX (Point Blue)

SludgeFinder

Sludge Blanket Level Detector Sludge Blanket Level Measurement System Pulsar’s Sludge Finder 2 is a controller and transducer system that provides reliable continuous sludge blanket level measurement. It is used in thousands of applications worldwide for detecting sludge blanket levels in primary, secondary, tertiary settlement tanks either with stationary or travelling bridges, clarifiers, gravity thickeners or sequencing batch reactor (SBR) systems. The two-part system includes a Viper Transducer which is purposely designed for sludge blanket level measurement. This purpose-built sludge level sensor uses sonar technology it is submersed into the liquid and detects the echoes from the material - any distinct density changes are reflected back to the transducer, the time taken for the echo to return is transmitted to the controller and the distance to the interface is calculated.

Ponsel Digital analysis sensors

Ponsel supplies a range of pH, redox, conductivity, salinity, turbidity, dissolved oxygen, overflow sensors, multi-parameter sensors, RS-485 sensors, field readers and fixed measurement units. We can deliver a unique combination by connecting one of these Ponsel sensors to a data logger, so that we can still measure in the field without a fixed supply voltage. Due to the low energy consumption, we can get measurement values wirelessly every day for a very long time (on 1 battery for 1 to 2 years). Choose the sensor you need for your application. Applications Spring water Drinking water Groundwater Effluent River water

Non-contacting Area Velocity Flow Meter for Open Channel Flow

MicroFlow area velocity flow meter MicroFlow delivers accurate and repeatable velocity flow measurement, either as a stand-alone device or as part of a complete area velocity flow meter system. Velocity x area calculation using MicroFlow provides a cost-effective flow measurement option compared to the installation of a primary measurement device, such as a flume, and provides a viable alternative where the hydraulics of the site do not allow for a restriction in the channel. MicroFlow Features: Non-contacting Cost-effective Lightweight, compact design Minimal installation costs No interruption to service Maintenance-free ATEX Ex mb Zones 1 & 2 approval RS485 Modbus IP68

OCM Flow

Open Channel Flow Meter FlowCERT Open Channel Flow Meter The FlowCERT open channel flow meter provides comprehensive flow monitoring with data logging and control functions for a complete range of flumes and weirs. It is compatible with a range of sensors in order to create a flow metering system to suit your application. Features: Easy prompt set up Standard on board memory gives 1 year log at 10 minute intervals 5 control/alarm relays Flow totalisation and outputs Universal flow calculation (32 setpoints) Penstock control using step time Modbus and Profibus options

Clamp-on flow measurement

Badger meter for clamp-on flow and energy measurements on pipes. With this series of clamp-on flow meters it is possible to measure flow and energy. As an example The TFX Ultra is a flow and energy meter for measuring flow and energy in liquids. Measure from the outside what takes place inside the pipe. These flow measurements are ideal for a quick check of the flow or energy consumption. Or for a semi-permanent set-up with battery and fixed power supply for mobile flow measurement. Liquids that can be measured range from ultra pure to highly contaminated. Properties: Modbus communication 4-20 mA output Data logger (optional) Display with background lighting Pipes 12 mm and larger Transit Time or Doppler

Low Cost Clamp-on flow meting; Flow Pulse

Non-invasive clamp-on flow sensor for pipes Flow Pulse flow sensor Flow Pulse® is a unique, non-invasive flow sensor that clamps to the outside of a pipe and is simply secured with a screwdriver. Flow Pulse offers you exceptional repeatability at a fraction of the cost of an equivalent magflow meter. It can reliably monitor flow across a variety of pipe materials including rigid plastic, stainless steel, cast iron and even corrugated pipes. The Technology Within Flow Pulse Flow Pulse fires ultrasound through the pipe wall at 90 degrees to the flow via a tangentially mounted high-output ceramic. Ultrasound is refracted at angles across the axis of the flow and is then reflected from bubbles, particles and vortices in all directions and at a wide range of frequencies. The returned signal is analysed using Flow Pulse's Refracted Spread Spectrum Analysis (RSSA) digital signal processing platform to derive flow information. RSSA analyses and integrates the received signals over a wide frequency range, then slices them for real-time analysis and flow rate calculation.

Ultrasonic wall thickness meter

Dynasonics WT-1 ultrasonic wall thickness meter One of the parameters to be set for clamp-on flow measurements is the wall thickness of the tube. If this is unknown then a wall thickness meter offers a solution. The ultrasonic wall thickness meter from Dynasonics is a particularly compact and versatile wall thickness meter. This Dynasonics WT-1 can measure up to a wall thickness of 200 mm. The accuracy of the measurement is 0.5%. The power supply consists of four internal AAA batteries. After use, the meter wall thickness switches off automatically. As soon as the batteries run out, the WT-1 indicates that the batteries need to be replaced. Due to the high transmitting power, the Dynasonics WT-1 wall thickness meter can be used in a wide range of applications, including pipes with a rough surface. Piping material can be: steel, cast iron, aluminum, red copper, brass, zinc, quartz, glass, polyethylene, malleable cast iron and PVC / CPVC. On the front side there is a 5 mm thick calibration block, with which the user can check the wall thickness meter and calibrate if necessary. It is also possible to display the sound speed in the material with this wall thickness meter. Properties: Measures both steel and plastic pipes Sound speed measurement of the material Wall thickness measurement from 1 to 200 mm Delivery including case manual and guided pasta Illuminated display

Electromagnetic flow meters

Measuring flow with electromagnetic flow meters Another name for this technology is, magnetically inductive flow meter, also called MAG meter, EMF meter or MID meter. Great advantage of these meters is no obstruction in the pipe, can work with high pressures and temperatures and with high accuracy. There are different versions for the different applications: May be meter M1000 The ModMAG® M1000 electromagnetic flow meter is designed for more general applications such as in machinery, vehicles and batch processes. The application range varies from DN 6 to DN 500 with most different process connections such as DIN flanges, dairy line connections, TriClamp®, etc. May meter M2000 The ModMAG® M2000 amplifier type is best suited for bi-directional flow measurement of liquids with a conductivity> 5 μS / cm (> 20 μS / cm for demineralised water). The ModMAG® M2000 has high accuracy and is easy to use. The four-line display shows all required data such as current flow, totalizer. Mag meter M3000 M4000 The new electromagnetic flow meter with modular design allows flow measurements in the ATEX zones 1 and 2, both in the mounted and the external version. The enclosure of the amplifier, made of powder-coated aluminum, is available in protection class IP 67. Programming can be done with the enclosure closed via three buttons. May meter M5000 The B-MAG | M5000 is a battery-powered electromagnetic flow meter with very high accuracy, even at very low flow rates. The excellent repeatability and the above-average battery life make this innovative water meter indispensable for the water market. Typical applications are leak detection in water networks, measurements of water consumption and irrigation installations. The meter is best suited for applications without a power supply where exact consumption or flow rates are required.

Level measurement; Pulsar

Level measurements; a product overview Our program includes various versions of level measurements for both solid and liquids. Non-contact measurement Radar > also in ATEX IMP > Low Cost, amplifier and sensor integrated Intelligent sensors > with Hart or Profibus, without amplifier Blackbox > amplifier without display Ultra > amplifier without with display Ultra Twin > amplifier with two displays FlowCERT > amplifier with display for open channel measurements Ultimate > amplifier with extensive PLC functionality Questions? Please contact us and we will help you further; 0315230266

Vlotter met extern gewicht

Vlotterschakelaar Pulsarpoint 800 is een serie van robuuste niveau sensoren. Ontworpen voor een betrouwbare detectie van het niveau van schoon en afvalwater. En dit voor een redelijke prijs. Er zijn twee versies van de vlotterschakelaar beschikbaar. De alarmcontrole van de vlotterschakelaar heeft een klein bereik voor nauwkeurige aan- en uitschakeling. De pompcontrole heeft een groot bereik, eenvoudig instelbaar, om pompen te schakelen.De vlotterschakelaar is gemaakt van hoogwaardig roestvrij PVC of polypropeen en is bestand tegen temperaturen tot 60C. Een speciaal ‘seal’ voorkomt dat er water in de sensor komt. Eigenschappen: Zeer betrouwbaar en robuust tegen een lage prijs Roestvrij PVC of polypropeen Bestand tegen temperaturen tot 60C Instelbaar pomp bereik, minmaal 4cm vanaf horizontaal Zeer goed bestand tegen rotatie en turbulentie Standaard met 3 of 10 meter kabel, langer is een optie

TOC meting

Nitraat en Nitriet tegelijk meten

Hand slibspiegelmeting

Handheld troebelheid, zuurstof en temperatuur meten

olitech 750w² portable monitor for suspended solids. The portable suspended solids and sludge level measurement The new handheld Infra Red water quality monitor is a simple, robust and accurate instrument for measuring a full set of water quality parameters with a single unit. The 750w² is designed to easily expand the parameters by a range of interchangeable water quality sensors that are connected via military grade cable connectors. This allows measurements of turbidity, temperature and dry matter measurement of the activated sludge process to be performed. The 4 measuring ranges are for solids: 0-200mg/l 0-1500mg/l 0-10,000mg/l 0-30,000mg/l Measuring range temperature: -5 to 80°C measuring range for dissolved oxygen 0-20mg/l. The robust unit has a built-in data recorder for storing at least 500 data points. The easy-to-use interface, multiple sensor options and ready-to-use design make the new monitor the market leader for on-site monitoring of TSS, turbidity, sludge level, temperature and dissolved oxygen. Features: IP 68 Cable length 10 meters (max 100m) No routine service required Easy to use Options: temperature sensor, dissolved oxygen sensor

Transit Time clamp on flow meting draagbaar

We have several options for a transit time flow measurement. - TTP - TFX 5000 – PTFM Of these three, the PTFM is the most versatile. The PTFM portable is a portable ultrasonic transit time and energy meter for measuring the flow and energy of liquids. It is a flow meter that can also be rented. You can use this PTFM as a mobile transit time flow measurement for clean to slightly (gray) contaminated liquids. It can measure flow in pipes with a diameter of DN15 to DN1200. The PTFM uses transit time technology for flow and energy calculations. . Features: • Measure flow from 0.03 m/s • IP67 • Graphs and diagnostics • Internal data logger • USB port • Up to 15 hours of operation on internal battery • Temperature range -40 to +150°C • Option; pipe thickness meter WT-1

Nitriet & Nitraat analyse uit actief slib met SetLR voorbehandeling.

The SetLR-Monitrix is specifically designed to overcome solids problems when measuring in the aeration tank of a WWTP. The SetLR-Monitrix is equipped with a NOx monitrix analyser in a heated cabinet suitable for outdoor installations*. The SetLR-Monitrix works on the basis of sample settling instead of filtration, which avoids problems such as biofilm build-up and interference on measurements. The SetLR system is robust, and easy to operate and maintain. The SetLR collects a sample of approximately 4 litres from the aeration tank into a settling tank. The supernatant is transferred to the sample chamber where vacuum and compressed air are used to collect a 50ml sample suitable for analysis.

Wireless communication; Elpro

At ELPRO, we design, manufacture and support reliable and secure communications to allow our customers to gain control of their assets. Our customers rely on our wireless solutions to improve their operations on a daily basis. That’s why at ELPRO we are dedicated to providing you new ways in improving your business today and into the future. Our products can be used in a variety of applications, including water/wastewater, mining, oil and gas, environmental, electricity utilities, building automation and irrigation / agriculture. Offering scalable solutions from basic point-to-point or meshing to large scale infrastructure deployments and covering all applications from the sensor to the control room using the ELPRO Industrial Wireless products

Clamp-on flow measurement portable

Portable flow measurement technology: The DXN-5P is a true hybrid ultrasonic flowmeter that automatically switches between transit-time and Doppler technology. The DXN-5P is a powerful tool for analyzing, verifying, and logging flow and energy.