Snoek Technology

Fijnrooster

Horizontal and inclined shaftless screw conveyors

These SNOEK SHAFTLESS SCREW CONVEYORS are suitable for the transport of various materials such as screened waste, dewatered sludge, industrial waste, etc. The unit consists of a SS 1.4301trough fitted with a plastic liner or special steel anti-wear lining, a cold hammered special purpose steel spiral blade and a slip on motor gearbox. The Snoek Screw Conveyors type SC can be mounted horizontal or inclined depending on the situation.

Vertical shaftless screwconveyors

This SNOEK SHAFTLESS SCREW CONVEYOR TYPE SCV is suitable for the transport of various materials such as screenings, dewatered sludge, industrial waste etc. The unit consists of a SS 1.4301trough fitted with a plastic liner or special steel anti-wear lining, a cold hammered special purpose steel spiral blade and a slip on motor gearbox. This place saving vertical Snoek shaftless screw conveyors type SCV are fabricated in one length or two/three steps lengths according to the requested transport height.

Distributionsystem

FOR TRANSPORTATION AND DISTRIBUTION OF A.O. SLUDGE, SCREENINGS, GRANULATES, POWDER, SLAUGHTERHOUSE WASTE, ETC * HORIZONTAL AND INCLINED INSTALLATION * LOW MAINTENANCE * MANUAL OR MOTORIZED DRIVE * BIG VARIATION INTRANSPORT CAPACITIES * GOOD REACH OF THETRANSPORTED PRODUCTS * STURDY CONSTRUCTION * MATERIAL:GALVANIZED STEEL OR SS304/SS316LIN OPTION

Screw conveyor and dewaterer

This SNOEK SCREW CONVEYOR/COMPACTOR is suitable for the dewatering and volume reduction of screened waste from domestic and industrial waste water. This SCC model comprises a dewatering, transport, pressing and compacting zone. The screening waste is transported to the pressing section where the screw is surrounded by a press cage with axial passages. The SCREENING WASTE is pressed together and dewatered in the compacting zone. The dewatering depends on the plug formed in the compacting zone and the pressure of the discharge valve. The spacing of the press cage is designed according to the material to be dewatered and the grade of separation desired.

Screw compactors

The SCREENINGS will be deposited in the receiving zone with drain section and will be transported by means of a screw conveyor to the rinsing section and later to the press section. Here the screenings will be reduced and dewatered. The screenings are evacuated from the screw compactor through a press/transports tube. The diameter, length and discharge height will be adapted to the situation. The SNOEK SCREW COMPACTOR can be placed directly under the finescreen. Waste disposal width to 2000 mm. The screenings can also be transported by means of shaftless screw conveyors, transport belts or water transport. In case the screenings are transported through a water transport channel, extra supplies will be fixed in the receiving zone of the compactor.

Screw wash press

The SCREENED WASTE is tipped into the receiving zone with dewatering section and is conveyed by means of a screw conveyor to the rinsing section where the pre-cleaning of the waste commences. The material is then moved onto the cleaning and pressing section. Here the screened waste is reduced and dewatered. The waste is removed from the cleaning press by means of a press/conveyor pipeline. The diameter, length and tipping height can be modified to meet all requirements. The SNOEK SCREENING SCREW WASH PRESS can be placed directly under the Snoek fine screen. Inlet width is upto 2000 mm. It is also possible to feed in the screened waste by means of an axe less screw conveyor, conveyor belt or water transport drain. If the waste is fed in via a water transport drain, extra equipment can be fitted in the receiving zone of the press.