The Geolux FX200 is an integrated instrument utilizing advanced FMCW 4D surface velocity radar and FMCW water level radar meter, and a LiDAR-based river channel scanner. Designed for non-contact measurement applications, the FX200 enables rapid deployment above water surfaces while minimizing maintenance requirements. The FX200 is based on the advanced 4D radar processing that delivers superior performance compared to conventional Doppler based surface velocity radars. While traditional Doppler sensors are susceptible to measurement degradation from ambient interference, precipitation, and structural vibration, the FX200’s signal processing architecture ensures consistent, high-accuracy velocity measurements under all environmental conditions. Calculation of the total flow discharge is internally implemented within the instrument by combining surface velocity measurement, water level measurement, and a the configured cross-section of the river or channel. The cross-section of the river or channel can be automatically determined and updated by an on-board LiDAR scanner, eliminating the need for manual measurements of the channel cross-section.

Gasfiltratie units voor hoge volumestromen en hoge concentraties, met dubbele ventilator (1 stand-by) voor optimale bedrijfszekerheid.

Hidrostal HIP pumps are compact screw centrifugal submersible pumps designed for pumping wastewater containing large solids. The pumps are characterized by their large spherical passage, clog-free operation, and excellent quality. The unique screw centrifugal impeller with a large spherical passage ensures clog-free handling of untreated wastewater. Hidrostal is launching a series of 5 HIP pumps. These 3” and 4” submersible pumps come with a standard configuration of materials and motor equipment. Thanks to various adapter pieces, the HIP pumps can be used with the most common base elbows on the market.

Pioneer in innovative and sustainable water management As a leading brand within the Water Is Life Group, Hydrosphere optimizes water quality through innovative technology. For over 20 years, we have proudly designed, developed, and manufactured high-quality, sustainable water management systems for future generations. Hydrosphere offers solutions for water management challenges in the areas of: - Rainwater systems - Break tanks - Pumping stations - Pressure boosting systems

idSET-OTM is a smart and versatile measuring device designed for real-time monitoring of oil layer thickness in oil separators. It supports multiple sensors—including the idSET-OTM oil sensor, idOil-LIQ high-level sensor, and idSET-SLU sludge sensor—to provide a comprehensive solution for separator monitoring.

The CYBERFLOW®-Accelerator is a revolutionary advancement over conventional flow generators. It has been specially developed and optimized for the most energy efficient generation of horizontal flows in applications such as biological wastewater circulation in donut, racetrack or carrousel type basins. Extensive research and development have led to efficiency improvements of traditional flow generators, regardless of the application. Optimization approach: This is made possible by a holistic, fluid mechanical optimization approach, which considers not only on the propeller design, but the interaction of the flow with the entire machine.

The iTURBO®-Blower is a centrifugal compressor with individually optimized precision rotating bodies. An intelligent operating concept with multiple machines enables the setting of optimum operating points to achieve maximum efficiency. Customer-specific pressure stages achieve the peak efficiency at the operating points that are most frequently approached based on the aeration strategy. This contributes to a significant reduction in energy consumption. The iTURBO®-Blower is driven by a high-speed PMSM (permanent magnet synchronous motor) with frictionless high-performance air bearings. The motor operates with an integrated frequency converter with an efficiency level > 96%. Not only does it drive the motor, but it also monitors the torque, power, and speed supplied to the motor, for reliable, low-maintenance operation. The compact and lightweight design ensures quick and easy installation.

PLC technology is becoming more comprehensive and automation platforms are meeting more and more market demands. An important factor here is freedom of design. With JUMO variTRON, JUMO introduces a completely new control system that can be built from the ground up according to specific customer requirements. JUMO variTRON gives you the opportunity to customise both the hardware and the software from the ground up. In addition to this great modular advantage, JUMO variTRON communicates with any communication protocol. Existing and new applications can thus be enriched with a large amount of data, allowing the customer to anticipate follow-up actions even faster.

IJzer roest, aluminium oxideert. Aanvallen van buitenaf beschadigen de laklaag van een elektromotor. Kolmer Top Coating beschermd uw motor tegen deze invloeden van buitenaf! - Levensduur verviervoudigd - Duurzame productie, duurzaam gebruik - Kostenbesparend - Onder extreme omstandigheden langdurig getest - Gecertificeerd Kom kijken op onze stand op de Aquabeurs in maart of neem contact met ons op! Voor vragen, bel Jan Bakker 06- 520 78 668 of Barry Grevengoed 06-82101454

Door het analyseren van energie- & neerslagdata binnen SAM® kunnen storingen worden opgespoord en eventuele schades en klachten (voortijdig) voorkomen worden met kostenbesparing tot gevolg.  Door de integratie met Smart Energy Solutions biedt SAM® volledig inzicht in energiedata bij alle objecten waar slimme meters aanwezig zijn. Dit gebeurt door het valideren en leveren van de data van de energiemeters gecombineerd met de data van Hydronet.

Krofta DAF container

The new Aqua Futurum plastic valve DN20 is Hydrocheck-Belgaqua certified. Isiflo BV manufactured this product from high-quality plastic for a long service life. The Aqua Futurum plunger valve has a compact design, is lightweight, 100% UV-resistant, and recyclable. High-quality engineering plastic - The plunger valve is made of polyamide PA12 with a 65% fiberglass filler. Lead-free design - No brass parts come into contact with drinking water. Secured snap-in construction - The valve head is secured with a removable stainless steel clip. Pressure loss - The valve has a full bore with very low pressure loss. Tightening torque - Low handwheel tightening torque for 100% sealing. Contamination - A stem seal prevents external contamination.

Sensor voor de bepaling van lage concentraties DO (vanaf 0,8 ppb). • Stabiele optische technologie (LDO) met snelle responstijd. • Niet beïnvloed door stroming, druk of CO₂. • Nauwkeurige trace-meting tot 0,8 ppb. • Geschikt voor de energie-, halfgeleider- en brouwerijsector. Flexibele installatieopties • Compacte 12 mm-vormfactor voor eenvoudige integratie. • Geschikt voor processen tot 85 °C (185 °F) en 12 bar. • Steriliseerbaar en autoclavabel tot 140 °C (284 °F). • Hoogwaardige oppervlakteafwerking (N5) voor hygiënische toepassingen • Ook beschikbaar als kant-en-klaar paneel hoogte 850mm