On-line Turbidimeter (ISO 7027) with free fall flow cell with high resolution The AquaScat measures turbidity of potable water according to IEC 27027 using 90+° scattered light detection in a free-falling water stream. This contactless design eliminates window foiling and minimizes servicing to a minimum. Calibration check is performed with a calibration unit that is either mounted to perform the check or that is already built in (depending on variant).

Aquathermie is de verzamelnaam voor technologieën waarmee thermische energie wordt gewonnen uit oppervlaktewater, afvalwater, drinkwater en rioolwater. Deze waterstromen bevatten, verspreid over de seizoenen, een constante basiswarmte die benut kan worden voor het voeden van warmtenetten. Door bestaande installaties in gemalen, pompstations, zuiveringen en drinkwaterstations aan te passen, kan met aquathermie op duurzame wijze energie worden opgewekt. Deze energie wordt ingezet voor het verwarmen en koelen van woningen, gebouwen en technische installaties. GMB zet haar kennis en ervaring in water- en installatietechniek, gecombineerd met een sterke duurzaamheidsambitie, in om bij te dragen aan een toekomstbestendige energievoorziening in Nederland. Benieuwd wat aquathermie kan betekenen voor uw assets of locatie? Ga met ons in gesprek op AquaNL.

Designed for aeration of Activated Sludge Basins in Municipal and Industrial Wastewater Treatment plants. The AQUATUBE® specific design prevents sedimentation and Optimises Mixing and Oxygen Transfer. The AQUATUBE® 90 is designed to be installed on DN100 stainless steel pipe or DN110 PVC using simple fastening system. The AQUATUBE® 70 can be installed on square stainess-steel manifolds or on polypropylene manifolds.

Suitable for a single freeze of 8-15 mm on horizontal or vertical pipes. Ideal for engineers and do-it-yourselfers. They make plumbing jobs simple and cost effective.

Ideal for engineers and do-it-yourselfers. Supplied with two freezing sleeves so that a pipe can be insulated with a double freeze. Suitable for 2 x 8-15 mm freezes or 1 x 22 or 28 mm freezes, on horizontal or vertical pipes.

Renotec pioneered asbestos remediation and removal in Belgium. Renotec still ranks among the top remediation companies. Because asbestos removal is a complex business where safety and correct working practices are essential, we continuously invest in the training and guidance of our professionals. Our experts guide you through the process from the very first moment. You can count on tailored advice and the right approach.

The AssetGuard CP Rectifier provides remote access to new and existing cathodic protection installations. The system consists of a data logger with an interface to a rectifier, connectivity, and an online management portal. This allows operators to centrally manage, analyze, and automatically monitor voltage, current, and potential without the need for costly field visits. What does the AssetGuard CP Rectifier do? All essential rectifier functions are directly accessible via the clear dashboard. Users can change settings, read measurements, and execute commands, all in real time. A rectifier adjusts its degree of protection in response to changing conditions, such as variations in soil resistivity, humidity, or temperature. Thanks to the AssetGuard CP Rectifier, the manager is kept informed and can remotely make direct, real-time changes to the rectifier settings as needed. Key Features • Remote control: Switch rectifier, controller, and timer functions on and off via the online dashboard. • Control modes: Access to voltage, current, or potential control with adjustable setpoints. • Real-time monitoring: actual values ​​of voltage, current, reference potential (on/off), and temperature. • Protection & diagnostics: automatic warnings in case of over- or under-protection, voltage failure, or temperature errors. • Secure by design: all communication is encrypted and RED 3.3 certified. In addition to the AssetGuard CP Rectifier, SENSEIAS offers the AssetGuard CP Potential for continuous monitoring of voltage potentials.

What’s new Our “basic” mechanical design has not been changed since 1992: vertical blades connected at the circumference of a horizontal flat plate. However based on many years of experience and testing with cone-shape and rim-blade aerator types the design of Astrumaer has been optimized pointing out following highlights: - Increased open space for blade, creating increased splashing volume (=more contact area between water drops and air) with as result increased oxygenation capacity - Angular displacement of blade, with as result smoother operation and increased oxygenation capacity. - Bevel shaped outside blade, creating a 10% lower tip speed velocity at the underside of the aerator which has a positive effect on mixing and flow propulsion. - Bended top of blade (partially) which guides the splashing of the water to avoid uncontrolled splash pattern and also increases the mechanical strength of blade. - Reduced diameter of horizontal plate which reduces the hydraulically up-trust forces working on gearbox and civil construction. Besides optimizing the shape of aerator impeller the Astrumaer distinguish itself by other suppliers by selecting the most suitable installation looking at project conditions. By using standardized components, such as intermediate shaft, gearbox and electrical motors and adjust aerator impeller to non-standard lay-out the most optimum “aqua-dynamically” solution will be created looking at oxygenation capacity/efficiency and mixing/flow propulsion.

An ATEX inspection is a comprehensive, periodically required inspection of electrical and mechanical components in explosion-hazardous environments in accordance with NEN-EN-IEC 60079-17. InProces Advies conducts the inspection based on all the information you provide, combined with extensive visual inspections and technical tests and measurements at your location. This provides you with the in-depth insight necessary for (maintaining) the explosion safety of your installation. - Detailed (commissioning) inspection - Periodic visual and accurate inspection - Support for continuous inspection (assessment and/or preparation of loop calculations)

We prevent rust in rooms, dry products and can optimize production processes with the right air drying and treatment.

De ATS430 is een compacte maar uiterst robuuste troebelheidssensor, geschikt voor het meten van troebelheid en concentraties van totaal gesuspendeerde stoffen (TSS) tot 4.000 NTU of 100.000 mg/l. De ATS430 is verkrijgbaar in hermetisch afgesloten uitvoeringen van roestvast staal of titanium, elk voorzien van krasbestendige saffieren optische vensters. Hierdoor biedt de sensor een veelzijdige oplossing voor toepassingen in zowel milde omgevingen als in omgevingen met agressieve of corrosieve media. De sensor wordt volledig fabrieksgekalibreerd geleverd en is direct gebruiksklaar, recht uit de doos. Gebruikers profiteren van: Geen onderhoud gedurende de volledige levensduur van de sensor In-situ reiniging Geavanceerde diagnostiek voor voorspellend onderhoud EZLink automatische sensorherkenning en -configuratie Adaptieve TSS-kalibratiefunctie voor verbeterde procesregeling Vereenvoudigde kalibratie Flexibele installatiemogelijkheden Gecertificeerde prestaties

Add oxygen to water and create a beautiful fountain image at the same time? Then choose an aeration fountain. An aeration fountain is a pond fountain and aerator in one. In many situations a nice and good solution for ponds and canals in residential areas, on campsites and in other places where aeration and movement is needed with standing water. An aeration fountain is very suitable for use in natural water, because the pumps are highly insensitive to pollution. Pond fountain and aerator Our V-Flow aeration fountain combines aeration with a beautiful fountain image, creates a healthy biological balance, reduces the water temperature and takes up the nutrient medium algae formation away. As a result, an aeration fountain produces beautifully clear water.