Verhoeve Nederland B.V. heeft 35 jaar ervaring als het gaat om waterbehandeling. Vanuit onze eigen ervaring als specialistisch bedrijf hebben wij een sterke visie op de aanpak van (afval-)waterstromen in diverse doelmarkten met oog voor besparing. De hierbij toegepaste technieken en kennis passen we met succes toe in onze waterbehandelingsprojecten. Omdat ieder project een eigen aanpak vraagt, werken wij vaak via een stappenplan: Quickscan - Labtest (in eigen lab) - Pilot - Full-Scale Veel maatwerk wordt via onze eigen testruimte doorontwikkeld naar een ontwerp en de uiteindelijke bouw van de zuiveringsinstallatie. Mogelijke technieken die wij kunnen verzorgen zijn: • Ontijzering • Ozon / AOP • Actief kool / harsfilters • Biologie • Ionenwisseling • DAF-units • Strippers Het totale project bieden wij aan: aanleg van boven en ondergrondse infra, leidingwerk, zuivering, monitoring en nazorg/ onderhoud.

This SNOEK SHAFTLESS SCREW CONVEYOR TYPE SCV is suitable for the transport of various materials such as screenings, dewatered sludge, industrial waste etc. The unit consists of a SS 1.4301trough fitted with a plastic liner or special steel anti-wear lining, a cold hammered special purpose steel spiral blade and a slip on motor gearbox. This place saving vertical Snoek shaftless screw conveyors type SCV are fabricated in one length or two/three steps lengths according to the requested transport height.

FEA (Finite Element Analyses) simulaties zijn een krachtig gereedschap om installaties dynamisch door te rekenen en een reële voorspelling van het trillingsgedrag te kunnen maken. Van Geffen Reliability voert FEA simulaties uit tijdens verschillende fases in het project, waarbij een project veelal van start gaat tijdens de conceptfase. Tijdens de conceptfase fase ligt de focus om trillingsgerelateerde risico's in kaart te brengen en eventuele structurele modificaties op voorhand aan te dragen (nog voordat de daadwerkelijke bouw begonnen is) binnen de beschikbare (ontwerp)ruimte. Daarnaast voeren wij FEA simulaties uit op installaties welke tijdens normaal operationeel bedrijf verhoogde trillingniveaus tonen en/of schades/afwijkende condities als gebroken assen, scheurvorming in constructies etc. laten zien. Hierbij stellen wij een referentie FEA model op om zo goed mogelijk het dynamisch gedrag van de bestaande machine te kunnen simuleren. Om onze modellen zo realistisch & betrouwbaar mogelijk op te zetten combineren wij meetdata (verkregen via bijv. trillingsmetingen, rekstrookmetingen etc.) met simulatiedata om vervolgens uiteindelijk mitigerende aanpassingen/modificaties te kunnen adviseren.

At Aqua NL, we will be showcasing solutions from Viking Johnson, known worldwide for their flexible and reliable couplings for water and infrastructure networks. Viking Johnson offers the ultimate solution for connecting, repairing, and adapting pipes, even when conditions deviate from standard standards. Thanks to their tolerance for dimensional deviations, ovality, and settlement, Viking Johnson couplings are ideal for both new construction and renovation projects. They are frequently used for repairs, material transitions, and temporary or permanent solutions in existing networks. Visit our booth and discover: - flexible couplings for various pipe materials and diameters - solutions for repairs, renovations, and network expansion - why Viking Johnson is trusted by water utilities worldwide. Our specialists are happy to help you find the right solution for your specific situation. Viking Johnson – flexibility that connects.

Vink assortiment leidingsystemen Vink heeft meer dan 20.000 kunststof artikelen binnen het ruime assortiment leidingsystemen beschikbaar. Het leveringsprogramma omvat o.a. drukleiding-, ventilatie- perslucht- en dubbelwandige leidingsystemen. Het gaat hier dan om buizen, appendages, fittingen en meet- en regelapparatuur, die beschikbaar zijn in alle relevante kunststofsoorten. Deze producten zijn uiteraard via onze webshop te bestellen.

The Vision pump, an extremely fish-friendly pump type, specially developed to allow fish migration through a pumping station. Ideal usage: The Vision is a fish-friendly pump, specially designed to allow fish to flow through a pumping station. The Vision is suitable for pumping stations and is available in a range of standard modules with a capacity of approximately 12-300 m³/min. Fish Friendly: The main objective of the development of the Vision pump was to prevent damage to fish stocks during the pumping of surface water. Research has shown that fish collide with the blades, get trapped in narrow crevices or can rub against a rough surface. By using a mixed-flow impeller with only one fish-friendly shaped blade in combination with a concrete snail shell where the tongue is far from the blade, an extremely fish-friendly design has been achieved.

The Vision-MV pump type has been developed for the fish-friendly drainage of sports fields and small polders as well as for use as a canal drainage system in residential areas. The Vision-MV pump is used for the fish-friendly pumping of surface water with a capacity of 0.5 to 13 m3/min at a head of 0 to about 5 meters. In the Netherlands the pumps are mainly used for draining small polders and sports fields. Further applications include: - Drainage of agricultural land in general - Irrigation of agricultural lands - Water level control in fishponds and nature reserves - Pumping of stagnant water for refreshing purposes

Our customers have insight into and access to migration and water quality data 365 days a year. Vislift installations in the customer's area can be included in the portal and provide insight into various migration and water quality parameters. The installation can be managed remotely via the Vislift Portal. Alarms and (fresh) water-saving functions can also be set.

Phosphorus recovery solutions are needed for municipal wastewater to reuse precious phosphorus. Several methods have been developed over the years, and some are commercially available. However, those treatment facilities using chemical phosphorus removal, still lacked a solution to recover phosphorus directly from sludge. This gap was filled when a magnetic separation of vivianite was developed by TU Delft and Wetsus. This new ViviMag® technology is today owned by Kemira and is currently piloted with Waterschapsbedrijf Limburg and Royal HaskoningDHV at Hoensbroek wastewater treatment plant. We are excited to present some results and tell you more about this trial!

Locating the sewer camera in the underground pipe above ground has never been easier. With this weatherproof locating system equipped with colour screen with pointer arrow, compass and real-time depth display, the camera or probe is quickly found. After pairing (optional) with smartphone or tablet, GPS coordinates are recorded. This data is easy to share with colleagues, other service providers or customers. Using the web portal (free of charge), this kind of data can be archived or accessed per project.

The vCam push cameras are suitable for detecting the location of the water pipe using the VM-550FF transmitter. Nowadays every camera system offers the possibility to locate the transmitter close to the camera with the help of a localization system, but in case you want to determine the location of the pipe yourself, the VM-550FF offers a smart solution. With the push cable in the pipe, the transmitter connected to the reel and the ground spike in the ground, the vLoc3-Cam system makes it easy to locate the pipe and even map its GPS coordinates and share it with others .