Add oxygen to water and create a beautiful fountain image at the same time? Then choose an aeration fountain. An aeration fountain is a pond fountain and aerator in one. In many situations a nice and good solution for ponds and canals in residential areas, on campsites and in other places where aeration and movement is needed with standing water. An aeration fountain is very suitable for use in natural water, because the pumps are highly insensitive to pollution. Pond fountain and aerator Our V-Flow aeration fountain combines aeration with a beautiful fountain image, creates a healthy biological balance, reduces the water temperature and takes up the nutrient medium algae formation away. As a result, an aeration fountain produces beautifully clear water.

MIXERS ensure the flow and movement of standing water in canals, ponds and storage basins and large-scale water projects. By circulating water, a mixer prevents the development of algae and significantly improves water quality. Mixers for large and small water features Our range consists of various mixers that are suitable for canals, ponds, storage basins and large-scale water features. The mixers are designed in a floating and fixed arrangement, whereby the motor cable is available in the desired length. Our mixers ensure a large water displacement. The mixers have an adjustable flow angle and low energy consumption. Our Flow mixer can also serve as ice-free preventer.

A VOLUME AERATOR – the name says it all – ensures an enormous water displacement. This results in degassing and oxygen enrichment in large bodies of water . Temperature reduction of heated water also takes place.

Located in Panningen (Limburg) there is a local Rossi authorized workshop for revision, adjustments and local afterservice.

WTW has a wide range of sensors which has auto cleaning function. So no service needed and high uptime

Control technology So many customers, so many demands and wishes. REMONDIS Smart Infra provides 'standard' control cabinets, but we also build custom ones, fully designed and built based on specific requirements. Thanks to our expert panel construction department, you can rely on the proper and safe construction and operation of the requested control system. REMONDIS Smart Infra's control systems have proven quality and are always built and delivered according to the most current standards in the field of technology, safety and sustainability. Telemetry Current information is indispensable. We implement and manage telemetry systems for structural and efficient management. By monitoring remotely you always have access to information about your installations. This makes it possible to optimize your installations and energy consumption. The system helps you to make your management process as efficient and cost-effective as possible. i-View The real-time management system i-View continuously collects, processes and automatically displays all data that is important to you. Because the system is continuously connected to all installations, you as an administrator are aware of the status of these installations at all times. The i-View data can also be easily accessed via a powerful database link to external data, such as meteorological data from the KNMI or data from other sources that are important for your real-time management system.

The self-cleaning Automatic Filter F450 (E) is pneumatically or electrically operated and used for the separation of solids in various different media like seawater, river water or process water. The Filter ensures reliable and continuous filtration in a variety of applications like cooling water cycles or water treatment plants. The filter can operate at very low pressures of only ≥ 0,7 bar and is characterized by an unmatched low pressure loss, a compact design and near maintenance-free operation. Due to the flexible combination of different design solutions and materials, the F450 can be easily adapted to the customer’s specific requirements.

The BactoSense is a fully automatic Flow Cytometer for continuous on-line monitoring of the amount of microbial cells in a process. The compact instrument is designed to provide a quick insight into the general microbiological quality of a liquid. Result aer available within 20 minutes. The biological “fingerprint” of a fluid and cell-size ratio (LNA/HNA) provide an instant insight into the biological change. Thresholds can be monitored and alarms generated automatically. Compared to plate counting (HPC), the result is much faster, more realistic and more comparable. A completely sealed cartridge is used. No chemicals and waste handling is required. This guarantees safe operation at all times. Cartridges are available for Total Cell Count (TCC) and Intact Cell Count (ICC). Even with a relatively small number of samples, the BactoSense is cost effective.

The Smart Cleaner is a patented automatic cleaning system for optic sensors. With this cleaning system it is possible to use these sensors in heavily polluted applications and still providing very accurate measurements/data. Our system is extensively tested in very polluted waste water installations with excellent reliable results. Low consumption of cleaning fluids

S320H stationary outdoor sampler The S320H is a cooled sample cabinet for outdoor installation. This sampling cabinet provides frost protection for the sample.   As with all Aquamatic sampling equipment, it also has the reliable Aquacell module with the fixed 50 ml volume tube. Properties: Case made of galvanized steel with polyester powder coating Meets NEN 6600-1 Lockable above and below cupboard Easy access for daily maintenance Choice of various sample bottles or barrels No need to open the cooler section during maintenance Sample temperature monitoring 0 ° C to 5 ° C

How NATUS automates your processes perfectly As experts in automation technology, we offer you a full spectrum of smart solutions. NATUS has decades of experience in carrying out customised automation projects flexibly and cost-effectively. This guarantees you, the customer, a key competitive advantage. It begins with a review of the target processes – including in respect of functional safety in accordance with IEC 61511. We manufacture your electrical cabinets and DCS cabinets, program and provide visualisation capabilities for your production automation, energy automation and global process control systems, and perform commissioning processes for them. Our module library, which is based on the powerful PCS 7 process control system, is custom-engineered, compliant with power plant requirements, and ideally suited for use in all process systems. We have extensive experience with systems from B&R APROL, Rockwell Automation and more. To reduce commissioning times significantly, your processes can be simulated on a digital twin, enabling a virtual commissioning process to be performed before the plant is even shipped.

The AVK spring loaded nozzle check valve is a reliable, fast reacting blocker of reverse flow in water pipes. In case of pump stop the spring loaded valve cone will make sure the water flow is shut off swiftly and quietly before it can change direction and cause water hammer. - A spring loaded valve cone makes sure the valve closes before reverse flow can occur - The optimized flow path keeps head loss down to a minimum - Stem, spring and fasteners in stainless steel - All iron parts coated with 150 µm fushion bonded epoxy (FBE) - Centring stem runs in high strength alu-bronze bushings

• Repico® Grip Plast type coupling provides a tensile / axial restraint connection for all plastic pipes, allows pipe section replacement, suitable for high pressure, and is available in DN 32-200 • Couplings < DN 50 with spot welding and from DN 50 seam welding • Easy installation by use of a torque wrench, limited space required for installation due to compact design • Specially designed flat rows of grips engages into the pipe surface without damaging the plastic material • Pressure range up to 16 bar (232 PSI) depending on size • Progressive sealing and anchoring • Max. angular deflection 5° for DN 32-50, 4° for DN 65-175 and 2° for DN >= 200 • Main components of stainless steel 316 • Green PTFE coated bolts • Light weight, appr. 30% in comparison with flanged connections • 60% noise reduction compared to rigid connections Note: For use in plastic pipes HDPE and PP we recommend the use of an insert (see mounting instructions)

• Repico® Slip type coupling provides a connection solution for all pipes that need to be able to expand/contract and/or support the restraint pipe. Available in DN 15-600 • Couplings < DN 50 with spot welding and from DN 50 seam welding • Progressive sealing • Easy installation by use of a torque wrench, limited space required for installation due to compact design • Pressure range up to 42,7 bar (620 PSI) depending on size • Max. angular deflection 5° for DN 15-50, 4° for DN 65-175 and 2° for DN >= 200 • Made of stainless steel 316 • Green PTFE coated bolts • Light weight, appr. 30% in comparison with flanged connections • 60% noise reduction compared to rigid connections