Sand and multimedia filtration ensures smooth and reliable water treatment. Read more about Sand & multimedia filtration on our website!

SAV With SAV .2 multi-turn actuators for open-close duty paired with ACV 01.2 actuator controls, the proven AUMA SA/SAR range is enhanced by variable speed models. AUMA is spearheading market technology by offering a wide speed control ratio of 1:10. SAV multi-turn actuators are rated for open-close duty and positioning duty (classes A and B) / (short-time duty S2 - 15 min). Special sizing for longer running times is available for the S2 - 30 min duty. Torque range 10 Nm to 1000 Nm Variable speed for open-close duty

The Saturnia soil moisture sensor from Agurotech is an extremely accurate, reliable, and sustainably designed sensor for agriculture and green space management.

A more robust version of the standard Solarbee 10000 designed to operate in water environments subjected to more extreme weather conditions. The design of the floats and arms and general overall engineering of the body of the unit ensures greater stability in more extreme conditions.

A compact version of the Solarbee floating mixer range with the advantage of a "J" hose inlet to avoid mixing of undesirable residues from shallow lake floors. Effective for cyanotoxin mitigation in raw water lakes and also for improved wastewater management to reduce sludge deposition and odors.

SCADAPack™ 470 and 474 Smart RTUs are edge controllers designed to manage assets and devices located remotely and in harsh environments, including hazardous locations. SCADAPack Smart RTUs provide solutions for a wide range of applications such as wellhead, pipeline, and tank automation, water well automation, potable water distribution, and wastewater collection.

Klik op de URL om naar de productpagina te gaan.

The SCREENINGS will be deposited in the receiving zone with drain section and will be transported by means of a screw conveyor to the rinsing section and later to the press section. Here the screenings will be reduced and dewatered. The screenings are evacuated from the screw compactor through a press/transports tube. The diameter, length and discharge height will be adapted to the situation. The SNOEK SCREW COMPACTOR can be placed directly under the finescreen. Waste disposal width to 2000 mm. The screenings can also be transported by means of shaftless screw conveyors, transport belts or water transport. In case the screenings are transported through a water transport channel, extra supplies will be fixed in the receiving zone of the compactor.

Transportation of screenings, sludges, waste and other solids by means of a shaftless spiral.

This SNOEK SCREW CONVEYOR/COMPACTOR is suitable for the dewatering and volume reduction of screened waste from domestic and industrial waste water. This SCC model comprises a dewatering, transport, pressing and compacting zone. The screening waste is transported to the pressing section where the screw is surrounded by a press cage with axial passages. The SCREENING WASTE is pressed together and dewatered in the compacting zone. The dewatering depends on the plug formed in the compacting zone and the pressure of the discharge valve. The spacing of the press cage is designed according to the material to be dewatered and the grade of separation desired.

A further development of the basic screw press principle, by which wet residue flows can be filtered and dewatered to a dryer product.

The HAUS Screw press is a dewatering machine alternative to the belt press and filter press in applications which require solid and liquid separation. Solid and liquid separation is performed by movable and fixed discs and the cylindrical screen and through compaction of the sludge towards the screen section by Archimedes' cylinder. Screw press is particularly suitable for dewatering of waste water treatment plant sludges and sludges produced at potable water treatment plants, which tend to release their water content easily. Special features: - automatic washing sequence; - automatic adjustable solid discharge; - no product blocking due to the moving discs.

MTI-Engineering is distributor of IEA screw presses for the Benelux and Germany. Sludge dewatering with an IEA screw press is characterised by low energy and maintenance costs, while important values such as dry matter of the filter cake are equivalent to those of existing systems.