Uitgang antwoord A

Uitgang antwoord B

Uitgang antwoord C

Aqua D&S supplies ultrafiltration that is BRL K-14010-1 approved. Ultrafiltration is an alternative technique for legionella prevention and is designed to improve the quality of your tap water and stop mould, bacteria and viruses, while retaining vital minerals. Ultrafiltration may only be used if a Risk Inventory/Management Plan is in place, drawn up by a BRL 6010 certified organisation, as described in the Water Supply Decree. It is crucial that all dead pipes are removed from the downstream installation. By installing ultrafiltration as a gatekeeper, you have optimal protection against Legionella in your drinking water installation. Ultrafiltration removes Legionella bacteria and other micro-organisms from your drinking water installation. Ultrafiltration does not add anything to the water, the composition of the water is not changed, and a brief power failure does not affect the functioning of the ultrafiltration system. The management plan may need to be adjusted to accommodate the flushing operations that must be carried out on a weekly basis. The number of water samples to be taken must also be adjusted, and they must be taken by an accredited laboratory. The pre-treatment of the downstream installation will be cleaned after the ultrafiltration has been installed in accordance with water worksheets 3.8 as described in our scope ISO 9001:2008. Aqua D&S has a disinfectant that is permitted in accordance with Compliance Article 95. The ultrafiltration is only suitable for cold and mixed water with a maximum temperature of 40 degrees Celsius. To guarantee the functioning of the ultrafiltration, installation and maintenance (integrity test) are carried out annually by Aqua D&S.

Ultrafiltration as a powerful weapon against bacteria and viruses. Read more about Ultrafiltration on our website!

Eenvoudig en snel flow meten in een bestaande leiding? Met de OPTISONIC 6300 ultrasone clamp-on flowmeter is dit mogelijk. De flowmeter bestaat uit een combinatie van één of twee clamp-on sensoren en één ultrasone signaalversterker. Zoals de term clamp-on al zegt, worden de sensoren aan de buitenkant van een leiding gemonteerd. Door de robuuste industriële constructie en het vernieuwende concept voor het aanbrengen van koppelvet, kunnen applicaties op gemakkelijke wijze worden uitgevoerd. De flowmeter kan snel en zonder specifieke training of gereedschap worden geïnstalleerd. De OPTISONIC 6300 heeft een robuust klemmechanisme van hoge kwaliteit. De roestvast stalen sensor-rail verbindt de signaalkabel met de versterker en zorgt voor een stabiele verwerking van het akoestische signaal. Gevolg: zeer betrouwbare metingen in applicaties voor de gehele industrie. Ook voor explosiegevaarlijke omgevingen, goedgekeurd volgens ATEX (EEx zone 1), FM (Class 1, DIV 1/2) en CSA (Class 1, DIV 1/2), en biedt HART®-communicatiemogelijkheden. Tevens verkrijgbaar met een roestvast stalen versterkerbehuizing, geschikt voor toepassing in moeilijke procesomstandigheden. Deze versie vormt een belangrijke aanvulling op de aluminium en polyamide/kunststof uitvoering voor algemene toepassingen. De OPTISONIC 6300 is inzetbaar in leidingdiameters van DN 15 t/m DN 4000. Het temperatuurbereik ligt van -50 tot + 200°C. De roestvast stalen versie is verkrijgbaar in twee sensor types, klein en middelgroot (DN 15 tot en met DN 400) en werkt in de reflex modus (V-mode). Voor veel bedrijven is een directe meting met onderbreking van het proces, vanwege installatie van de flowmeter ondenkbaar. De clamp-on flowmeters van KROHNE worden hier veel toegepast, drukverlies wordt hierdoor vermeden en onderhoudswerkzaamheden blijven tot een minimum beperkt.

Naast traditionele debietmeters biedt ASV-Services in samenwerking met partners Ultrasone Clamp-on debietmeters aan voor een nauwkeurige debietmeting zonder het onderbreken van een bedrijfsproces of downtime. Deze draagbare of vast op te stellen clamp- on producten voldoen aan hoge kwaliteitsnormen voor productie en prestatiekenmerken. Om de lange termijn prestatie en betrouwbaarheid te garanderen worden onze producten standaard geleverd met roestvrijstalen transducers op alle modellen en behuizingen om zelfs de de meest zware omgevingscondities te weerstaan.

Ultrasonic cleaning is extremely suitable for parts that have many corners, sides and holes that can harbour dirt, such as a filter cartridge or filter element. The cleaning fluid is distributed via sound waves, which means that there is no risk of scratching or damage. The right combination of frequency, time, temperature and cleaning agent ensure a perfect deep cleaning with micro precision. Lubrafil offers this service for customers and generally combines this with servicing to the filter. In many cases customers have a spare filter cartridge or filter element that we can install as exchange set during servicing. The contaminated filter cartridges are then taken away for ultrasonic cleaning. We can also keep these cleaned cartridges in stock for the customer so that our service engineers can take these with them at the next service. This is another example of how we can manage your entire maintenance cycle.

Dynasonics WT-1 ultrasonic wall thickness meter One of the parameters to be set for clamp-on flow measurements is the wall thickness of the tube. If this is unknown then a wall thickness meter offers a solution. The ultrasonic wall thickness meter from Dynasonics is a particularly compact and versatile wall thickness meter. This Dynasonics WT-1 can measure up to a wall thickness of 200 mm. The accuracy of the measurement is 0.5%. The power supply consists of four internal AAA batteries. After use, the meter wall thickness switches off automatically. As soon as the batteries run out, the WT-1 indicates that the batteries need to be replaced. Due to the high transmitting power, the Dynasonics WT-1 wall thickness meter can be used in a wide range of applications, including pipes with a rough surface. Piping material can be: steel, cast iron, aluminum, red copper, brass, zinc, quartz, glass, polyethylene, malleable cast iron and PVC / CPVC. On the front side there is a 5 mm thick calibration block, with which the user can check the wall thickness meter and calibrate if necessary. It is also possible to display the sound speed in the material with this wall thickness meter. Properties: Measures both steel and plastic pipes Sound speed measurement of the material Wall thickness measurement from 1 to 200 mm Delivery including case manual and guided pasta Illuminated display

Thanks to its simplicity and efficiency, water sterilization by UV radiation has developed extensively in the recent years.

UniLux Overview 2000m depth-rated fluorometer for environmental and process control applications in both fresh and salt water, the UniLux is capable of measuring: Chlorophyll-a Phycocyanin Phycoerythrin Turbidity Fluorescein Rhodamine UniLux is compact and easy to integrate in wider systems and platforms including CTDs, data buoys, monitoring stations, surface vehicles, AUVs and ROVs. Sensor Monitor software UniLux data is now easily accessible using the new Sensor Monitor software, which allows you to view and store your data on Windows devices including tablets. UniLux Features -Low-cost solution for biological monitoring on existing platforms and large scale monitoring programmes -Real-time data output in μg/l -User configurable sampling frequency from 0.1 Hz to 3 Hz -Robust ambient light and turbidity rejection -Compact unit measuring only 26.5mm diameter and 140mm length -RS232 output as standard, RS422 and SDI-12 available on request -Depth rated to 2000m - Windows software included as standard to view data in real time and store on your Windows device - User calibration kit with sold standard for easy maintenance of your instrument to ensure long term data reliability - Wiper available for shallow water deployments - UniLux Applications Harmful algal bloom detection and monitoring Coastal zone monitoring Biological assessment in marine protected areas Integration with CTDs, buoys, surface vehicles, ROVs, AUVs and towed vehicles

The IJinus CSC and LCS overflow detectors detect overflow by means of a capacitive measurement with the CapAir® technology air reference. This ensures that maintenance is significantly reduced, in contrast to traditional resistive and capacitive technology. Both the CSC and the LCS work on this principle. The difference is in the cabling with the LCS being wireless.

The most efficient and cost-saving water softener for your business. Increasing the efficiency of your water treatment while drastically reducing costs? That’s music to the ears of any process or production manager. The Eco-Vision Upflow Softener (EVUS) drastically reduces operational costs and contributes firmly to sustainability within your company. The water softener removes excess calcium and magnesium from your process water using cationic resins. Softening is thereby done in upflow service and regeneration in downflow mode. Besides improved sustainability (less rinse water and less chlorides), it also delivers a very high ROI. The Eco-Vision Upflow Softener is optimally applicable from 100 m2 per day. Depending on the sizing and hardness of the water, we are already talking about a payback period within a year. On average, an EVUS pays for itself between 1 and 5 years. A no-brainer for any company pursuing both cost efficiency and sustainability.

UPPWATER brings together some 600 parties: about 500 companies (over 90% SMEs), research institutions, water boards, drinking water companies, regional development agencies, industry associations, provinces, municipalities and some NGOs. UPPWATER implements the Water Technology Growth Plan and is partly made possible by funding from the National Growth Fund.