Disinfection systems. The more water consumption by public, industrial and domestic use increases, the more necessary it becomes to use waste water for reuse. This means that there is a greater need to purify and disinfect this waste water efficiently. This use of purification and disinfection requires the use of reliable dosing systems. Lutz-Jesco has developed systems for disinfection, among other things, over the many years of research & development. These are used worldwide and have the required international approvals and certificates. Various methods are used for the disinfection of drinking water, swimming pool water, cooling water, process water and waste water. Each method has its specific properties and method of using chemicals. Our systems developed according to DIN standards guarantee optimum water quality through the exact coordination of the required disinfection capacity and the production and dosage of the disinfection medium. Here we bring our knowledge and our experience to offer the best solution – technically and economically. Chlorine electrolysis systems Calcium hypochlorite CHC Chlorine dioxide

FOR TRANSPORTATION AND DISTRIBUTION OF A.O. SLUDGE, SCREENINGS, GRANULATES, POWDER, SLAUGHTERHOUSE WASTE, ETC * HORIZONTAL AND INCLINED INSTALLATION * LOW MAINTENANCE * MANUAL OR MOTORIZED DRIVE * BIG VARIATION INTRANSPORT CAPACITIES * GOOD REACH OF THETRANSPORTED PRODUCTS * STURDY CONSTRUCTION * MATERIAL:GALVANIZED STEEL OR SS304/SS316LIN OPTION

DolPHin Radar Meetbereik 0-8 meter LR100 is een compacte radar van 80 GHz met ingebouwde Bluetooth. Met zijn compacte formaat, smalle beam en ruim meetbereik is de DolPHin flexibel toe te passen in waterinstallaties, rioleringen, oppervlakterwater als ook in bestaande tankopeningen of door de wand van kunststof tanks zelfs storingsvrij verzekerd. De ACOWA DolPHin heeft een opstarttijd van minder dan 10 seconden, dit maakt hem ideaal voor overstroming/ overstort meting en detectie met onze GEKKO batterij gevoede datalogger. Bluetooth®-technologie voor eenvoudige en snelle installatie met de DolPHin mobile IQ-app.. De smalle straal van 80 GHz en het compacte formaat zorgen voor de gemakkelijkste installatie en inbedrijfstelling Speciale radar-microchip maakt metingen mogelijk, zelfs met betrekking tot condensatie, opeenhoping of luchtige vaste stoffen, zelfs de zwakste signalen worden nog steeds gedetecteerd ‘Zero blanking’ zone maakt meetbereiken tot aan de sensor mogelijk en met een nauwkeurigheid van 2 mm vermijdt u dure handmatige meetmethoden Optioneel Modbus RTU voor intelligente meting van waterniveau lokaal of in de ACOWA DASH-cloud Eenvoudige muurmontage middels optioneel verkrijgbare 80mm of 200mm beugel van SS316L

Water aangedreven doseerpompen zonder elektriciteit voor de meest uiteenlopende doseertoepassingen.

Verdringerpomp die wordt gebruikt om verschillende soorten vloeistoffen ofwel additieven in een nauwkeurige dosering toe te voegen tijdens een proces.

Dosing Pumps – reliable and flexible At a drip, or “flat out” with maximum flow rate, in tropical temperatures and where possible in really acid environments: Dosing pump requirements are as varied as the possible applications and uses. Lutz-Jesco has therefore developed special solutions for each area of application. Our extensive range of products start from cost-effective, magnetically-operated diaphragm dosing pumps, through the "muscular" motor-driven diaphragm dosing pumps, up to the piston dosing pumps for high pressure requirements. These are used for dosing fluids with highly varied viscosities, most of which are chemically aggressive and toxic, and some of which are actually abrasive or emit gases.

With Desman's weir and double acting penstocks you can keep wastewater flows under control. Our gates, made of stainless steel 316L, are designed for the toughest conditions and the most aggressive flows. Due to their smooth surfaces, they guarantee limited dirt deposits and easy maintenance. As a manufacturer, we can - in addition to our wide range of slides in standard sizes - manufacture slides to specification.

AVK double eccentric butterfly valves with tilted disc are designed for easy operation and long service life. The disc seal is made of AVK's drinking water approved EPDM rubber featuring an excellent compression set and ability to regain the original shape. The high quality epoxy coating and fully encapsulated shaft/disc connection ensure optimal corrosion protection and durability. FEATURES - Double eccentric design releases seal compression after only few degrees of opening resulting in low operating torque - Disc firmly fixed to the shaft to prevent fluttering and a slight tilt allows for precise adjustment of the closed position - Disc seal profile and rubber quality ensure low closing torque - All rubber parts drinking water approved by multiple institutes - Fasteners in stainless steel, A2 - Stainless steel shaft and seal retainer ring - Machined and epoxy coated ductile iron seat integrated in the body - All threaded connections are sealed with O-rings for protection against medium and environment - Radial bearings in self-lubricating PTFE/bronze composite - Shaft ends fitted with an end cover that keeps the shaft in position against system pressure and seals the disc interior against corrosion - Replaceable shaft seals with two EPDM O-rings; gaskets to the exterior in hydrocarbon resistant NBR - Coated with blue RAL 5017 FBE to DIN 3476, GSK and approved by WRAS-DVGW/W270/UBA, 250µm - Drinking water approved by DVGW and WRAS, drinking water approved by KIWA

The water challenges of today and tomorrow are significant, complex, and urgent. They include ageing infrastructure, increasing demand, climate change, water scarcity, stricter laws and regulations, and growing pressure on space and resources. At the same time, drinking water utilities are increasingly organising themselves as asset management organisations, and the need for certainty in planning, costs, and performance is growing. Sweco Water Technology – Drinking Water Team stands alongside its clients to address these challenges in an integrated and achievable way. We support projects from the initiation phase through to construction supervision: from the Programme of Requirements, Concept Design, and Detailed Design to Specifications, Tendering, and Realisation. Our multidisciplinary teams combine recognised expertise in Technical Project Management, Mechanical Engineering, Electrical Engineering, Process Automation, Civil Engineering, Structural Engineering, and Underground Infrastructure into coherent and future-proof solutions. We believe in enjoyable collaboration, long-term relationships, and genuine commitment. As a trusted partner to our clients, we understand their assets, ambitions, and organisations. This is what sets us apart: a practical focus on what truly works. The complexity of integrated drinking water challenges is increasing, while expertise is becoming scarcer. That is precisely why we bring together the right expertise within Sweco. From traditional project delivery approaches to innovative forms of collaboration, we choose what best fits the challenge and the client. With attention to sustainability, circularity, and climate adaptation, we create added value in every phase of the project. With a robust growth path, we are building strong, attractive, expert, and practical drinking water knowledge — driven by job satisfaction, humour, and craftsmanship. Sweco – engineering tomorrow’s water solutions, today.

Consultancy, design, implementation, and renovation. Clean drinking water is vital. The infrastructure that makes this possible begins underground, and we help build it. We design, implement, and renovate drinking water pipes that meet the highest quality standards. Whether it's a new route or a replacement project, we combine technical expertise with practical experience and a strong focus on safety and collaboration. Through smart planning and close coordination with our partners, we ensure minimal disruption and efficient execution.

Het nemen van monsters en analyseren is in eerste instantie noodzakelijk om te kunnen beoordelen of een Legionella bacterie in een waterleidingsysteem aanwezig is. In samenwerking met een RvA geaccrediteerd laboratorium (Vitens Leeuwarden) verzorgen wij diverse microbiologische monstername waaronder Legionella in drinkwater- en koelwatersystemen.Van de uitslag van de monstername ontvangt u een rapportage van het laboratorium. Bij een normoverschrijding ontvangt u advies over de te volgen maatregelen. Voor drinkwaterkwaliteit van drinkwaterkelders, zandfilters, beluchtingstoren en transport waterleidingen na reiniging en desinfectie verzorgen wij drinkwatermonster.

With the Rossi G-Series and the Rossi EP-Series, Rossi delivers a great combination in quality and flexibility. Think of a product including 2K coating up to ratios of more than i=20,000. Equipped with IEC mounting flange to mount standard Rossi TX Motors or a customer-specific model of choice.

Rossi's drives can be equipped with a smart and decentralized inverter that is mounted directly on the terminal box of the electric motor. This ensures a great flexibility and savings in cost and design. The dDrive inverter is suitable for the most demanding applications and can be equipped with the most common fieldbus connectors.