The KATflow 230 is a portable clamp-on flow meter with two measurement channels offering a variety of optional features. It is a compact and robust instrument that comprises additional functions that can turn it into more than just a flow meter. In contrast to its hand-held counterpart, the KATflow 230 (Katronic™) offers two measurement channels which enable the instrument to monitor two pipes simultaneously. This dual-channel measurement function can also be used to monitor one single pipe in a two-path sensor mounting configuration in order to increase the accuracy under difficult flow conditions with disturbed flow profiles. The incorporated calculation functions Sum, Difference, Average and Highest Value complete the dual-channel feature.

Keerkleppen of terugstroombeveiligers dienen jaarlijks op hun goede werking en functionaliteit gekeurd te worden. Dit wordt beschreven in het werkblad 1.4G van de Vewin. De complete controle wordt volgens de voorgeschreven meetmethode uitgevoerd (overdruk- onderdruk of de traditionele). U ontvangt een rapport en certificaat ter bevestiging wanneer en met welke methode deze is uitgevoerd. Tevens worden defecte keerkleppen, indien mogelijk in overleg, direct vervangen. Bij een contract wordt u jaarlijks geïnformeerd wanneer de controle weer zal plaatsvinden.

KemConnect DEX is based on performic acid which is a powerful peroxygen compound that disinfects rapidly, and at low doses. Because it is chlorine-free and does not produce toxic by-products, KemConnect DEX is a sustainable disinfection strategy. The efficiency of performic acid (PFA) as a disinfectant enables a cost-effective approach to the disinfection process. The footprint for chemical storage is small, as are the logistic requirements for chemical supplies. The on-site production system that produces performic acid is compact and has low energy requirements. As an added value, Kemira’s expertise and experience in water management expands your in-house capabilities to quickly resolve water treatment challenges. Convenience is a word rarely used when disinfecting wastewater, but with KemConnect DEX it’s a reality. The package includes all the required chemicals, a compact DEX-3 unit with a reactor capable of on-site PFA production and the KemConnect smart process managment system. This turn-key system is fully automated and installed by Kemira. KemConnect DEX is monitored and controlled on a digital platform that automates dosing and has real-time access via the internet on any connected device. System status, alarms and reporting occur via SMS and email. KemConnect DEX has low capital investment requirements, low operating-costs and is an environmentally sound disinfection solution.

Kemira KemConnect P-optimizer helps plant operators to dose the exact amount of coagulants they require for chemical phosphate removal. Continuous monitoring combined with precise control over product dosing allows operators to react proactively to fluctuations in the feed to their wastewater plant. With Kemira KemConnect P-optimizer, overdosing “to be on the safe side” is as much a thing of the past as limit violations that result from the late detection of phosphate peaks. To ensure a quick start-up phase, Kemira installs and calibrates the relevant sensors, supplies the required chemicals, and ensures that your staff receives proper training. We can also manage future maintenance and calibration activities so that you can focus on managing and optimizing your operations. For even smarter chemical management, KemConnect P-optimizer can be combined with KemConnect VMI, our real-time stock-monitoring solution.

Kemira KemConnect™ PT is an automated solution to optimize the chemical pre-treatment process, enabling various downstream efficiency improvements. The system is designed to maximize the energy savings and energy production of a wastewater treatment plant and to maintain a consistent level of treatment within a minimum and maximum range. The application of such a system can limit or prolong the need for major plant expansion while addressing sustainability goals at the same time. The main objective is to settle just enough primary solids to alleviate most of the burden on the aeration process, hence lowering the energy required for aeration. The second objective is to increase biogas production by increasing the amount of more easily biodegradable sludge sent from the primary treatment step to the digestors as opposed to secondary sludge, which is much harder for the bacteria to digest. The system includes the measurement of flow, turbidity, and suspended solids in the influent wastewater, as well as the measurement of ammonium, phosphate, COD, and nitrate and oxidation reduction potential in the nitrification/denitrification process. Feedback input loops from aeration energy and biogas production are also included. Utilizing intelligent algorithms, the optimal chemical dosage for the desired outcome is calculated based on the existing conditions. The service includes the selection and supply of chemistry, provision of online equipment, recommendations for optimal dosage points, and a customized reporting system. The KemConnect platform allows you to continuously monitor all relevant performance parameters and cost savings in real time.

The KemConnect SD service optimizes your chemical sludge treatment prior to the dewatering equipment even under changing process conditions. We apply online analytics and utilize an advanced dosage control algorithm to constinuously optimize your chemical sludge conditioning. The service includes the selection and supply of chemistry, the provision of online equipment, recommendations for optimal dosage points, and a customized reporting system. Kemira’s KemConnect platform enables the continuous monitoring of all relevant performance parameters in real time. Dedicated KemConnect SD dashboards provide our service team with valuable information for application optimization and remote performance control, while you can accurately monitor cost savings to help maintain the efficiency of your sludge dewatering process.

Valbeveiliging en persoonlijke beschermingsmiddelen (PBM's) moeten elk jaar gekeurd worden. Dit is wettelijk verplicht. Tijdens deze keuring beoordelen wij of het middel nog veilig kan worden gebruikt en of het voldoet aan alle normen. Dit kan bijvoorbeeld gaan om helmen, harnassen en ladders. Maar ook permanente valbeveiliging. Door regelmatig te keuren blijven deze middelen betrouwbaar, onmisbaar voor veilig gebruik.

𝐊𝐞𝐮𝐫𝐢𝐧𝐠𝐞𝐧 Wij verzorgen voor u de NEN 3140 keuringen. Tijdens de keuringen beoordelen wij de veiligheid van de installatie aan de hand van een visuele inspectie en middels het doormeten van de installatie. Per installatie stellen wij een keuringsrapport op, hierin is inzichtelijk gemaakt de uitkomsten en keuringswaarden. Goedgekeurde installaties voorzien wij van een keuringssticker. 𝐈𝐧𝐬𝐩𝐞𝐜𝐭𝐢𝐞𝐬 BRL K14020 is de norm voor Kwaliteitsgestuurd onderhoud aan pompen en gemalen. Door het toepassen van de norm is het mogelijk op een eenduidige manier installaties te onderhouden en te monitoren. De BRL inspecties worden uitgevoerd door een vaktechnisch specialist met ruime ervaring. Tijdens de inspectie worden de volgende werkzaamheden uitgevoerd: ⦁ Beoordelen van alle componenten van pompen en gemalen volgens de BRL K14020, waaronder door visuele inspectie, controle en metingen. ⦁ Per installatie wordt een inspectierapport opgesteld. In de rapportage worden overzichtelijk de uitkomsten van de visuele inspectie, controles, metingen en de constateringen weergegeven. Sencon voert als onafhankelijk specialist tegen scherpe tarieven inspecties voor u uit. Wij adviseren de BRL-inspecties jaarlijks uit te voeren, zodat toestandsafhankelijk onderhoud kan worden uitgevoerd aan uw riooltechnische installaties.

The WIS Award, powered by the Water Alliance, is a well-established recognition within the Dutch water technology sector. Every two years, leading innovators compete for the title — a process that demands perseverance, ambition and a strong drive to create impact. With the WIS Award, Water Alliance highlights pioneering Dutch water technology companies from the initial selection rounds all the way to the Grand Finale. Participation brings long-term visibility and international exposure. The winner receives a €10,000 marketing support package, making the WIS Award a meaningful boost for further growth.

AVK lug/wafer knife gate valves are bi-directional with full and plane bore. The protected sealings and high quality materials bring about a great performance and a long service life. AVK knife gate valves are available with lever, non-rising stem and handwheel, rising stem and handwheel, pneumatic actuator, ISO top flange for actuator or complete with electric actuator. FEATURES - Replaceable top packing gland enables sealing replacement without disassembly of the valve - The valve is self cleaning as particles will be pushed off the gate when opening the valve. For extra protection of the packing gland a scraper is available as an optional extra. - Bi-directional, can be installed independent of the flow direction - Full bore with no reduction of the flow - Plane bottom prevents sediment from being accumulated - No cavity in the body and thus no risk of clogging - U-shaped one-piece NBR sealing between the body parts makes up for tolerances in coating and casting. It is reinforced with a steel insert to protect it from being damaged during operation. - Encaged stem with yokes prepared for mounting of micro switches and inductive censors - Stem and gate connection is secured with self-locking nuts - Supports integrated in the body casting protect the gate from deflecting under pressure - Body of ductile iron with 100-150 μm UV resistant polyester coating, RAL 5017. Optionally of acid-resistant stainless steel or duplex - Yokes of carbon steel with coating 100-150 μm of plascoat PPA 571 Aqua - Gate, stem, bolts and nuts of acid-resistant stainless steel - Washers under the bolts protect the coating - Slim design and low weight - Approved according to the 2014/68/UE Pressure Equipment Directive - Approved according to the 2014/34/EU ATEX Directive - Available in larger dimensions - Optionally in higher PN class

Kogelafsluiters

IJzer roest, aluminium oxideert. Aanvallen van buitenaf beschadigen de laklaag van een elektromotor. Kolmer Top Coating beschermd uw motor tegen deze invloeden van buitenaf! - Levensduur verviervoudigd - Duurzame productie, duurzaam gebruik - Kostenbesparend - Onder extreme omstandigheden langdurig getest - Gecertificeerd Kom kijken op onze stand op de Aquabeurs in maart of neem contact met ons op! Voor vragen, bel Jan Bakker 06- 520 78 668 of Barry Grevengoed 06-82101454

Om beter inzicht te krijgen in alle te beheren assets biedt SAM® de mogelijkheid om te koppelen met verschillende datalagen. Hierbij kun je denken aan het weergeven van (pers)leidingen, putpunten, bemalingsgebieden, etc. op de kaart. Dit is een handig middel als je wilt zien hoe de leiding vanaf het gemaal waar je bij staat