The tank is designed to be easily located in a corner, especially in confined spaces. The container has a 150 mm O-ring sealed lid as standard. For mixing, dosing and storage. The container can be supplied with connections as required.

The container is equipped with a standard O-ring sealed manhole with hot-dip galvanised clamping ring. In addition, there is a 150 mm screw cap on the top of the tank for easier cleaning. To easily secure the tank, there are grooves for tension straps on the top and side of the tank. The container can be equipped with connections, entirely according to your wishes. The top of the container is loadable, e.g. for a dosing pump. Flat surfaces for mounting connections on the short sides of the tank, four of which are protected/sunk into the tank.

The tank has a conical central outlet and is supplied with a pallet section for use with a pallet jack or forklift with adjustable tines. Substantial 150 mm O-ring sealed screw lid as standard. The well-protected lid located on top of the tank can be fitted with a lock (accessory). The container can be supplied with connections as required. A valve assembly in acid-proof material or PE/PVC is available as an accessory. The top of the container is load-bearing for e.g. a dosing pump. Also available in a smaller 200 L version.

The tank has a separate lid with a handle; the lid rests on top of the container. The container can be supplied with connections as required.

CPX Silos have a special design that enables mass flow, which facilitates container emptying. A slide valve is available as an accessory in both stainless steel and hot dip galvanised versions. However, the outlet can be modified as necessary and supplied both threaded and with a flange. The stand can be fitted with wheels and customised. Ideally, the stand is moved by means of a forklift. Also available in 800 L and 1200 L versions.

The tank has a 600 mm O-ring sealed inspection hatch attached to the tank with a painted tubular stand. There are a total of four flat mounting surfaces on the top of the tank and its lower side. The tank is completed as necessary with a safety bund and suitable connections. For tare weight 1.5 kg/dm3 . Specifications - Material: PE Shape: Cylindrical Bottom shape: Straight Design: Closed Color: Black Volume (L): 15000 Height (mm): 4770 Diameter (mm): 2140 Surface area (m2): 4.6 Weight (kg): 630 Tare weight (max kg/l): 1.5

Specifications Material: PE Shape: Cylindrical Bottom shape: Straight Design: Closed Color: Natural or black Volume (L): 23000 Height (mm): 3950 Diameter (mm): 2800 Weight (kg): 500 Tare weight (max kg/l): 1.2 Tollstatistical code: 3925100000 Climate impact (kg CO2-ekv.): 1635

Our innovative 500 litre transport tank is designed for shock-absorbing and stabilising liquids efficiently in all directions, making it ideal for a variety of applications. With the ability to be positioned both vertically and horizontally, it’s flexible enough to fit most vehicles such as trucks, pick-ups, trailers, or boats. Its stability makes it perfect for connections, pumps, and powerful flows, while multiple tanks can be joined together to allow for larger volumes. With a slim design of only 420mm in size, our transport tank is efficient in terms of space utilisation and passage through tight spaces. This makes it very suitable for storing liquids on boats and smaller vessels where it could contain drinking water, grey water or black water. From portable irrigation systems and cleaning to use in agriculture and animal handling, our tank is a reliable partner. The transport tank is also perfect for fire fighting, de-icing or providing fresh water at events.

When designing this range of gearbox, S.T.M. technicians decided to project one single body to include all gears. This solution allows an efficient heat dissipation as well as a high housing rigidity and application easiness. Efficiency will then be positively improved but also longevity and highest transmittable torque. The compromise cost/performances is particularly centered in the middle range reduction ratios.

Our cross-flow scrubber achieves optimum flexibility. By arranging several scrubbing stages one after the other, dust, acidic or alkaline components of your exhaust air are removed in just one system. With horizontal scrubbers, the exhaust air flows horizontally through the packing bed and comes into contact with the scrubbing liquid in a “cross-flow”. This transfers the pollutants from the air into the scrubbing water. Depending on the application, a chemical-oxidative or biological mode of operation is possible. Since each scrubbing stage has its own, self-sufficient scrubbing water system, different environments can be set through which the exhaust air must flow. This ensures optimal and targeted removal of the most diverse pollutants in one system.

Is a standard or even a modified motor not sufficient for your purposes or does the motor not fit? That is the point where the real work begins for EN motors. We can produce a totally customized motor. We have engineers who can design a motor from scratch and have specialized employees to produce, assemble and even install the motor on location. As a result we can come up with a solution for any specific situation. A few examples: from a high-speed main drive for cotton spinning machines to a highly innovative drive for dyeing textiles in a medium of supercritical CO2 or to motors for industrial vibrator screens from motors that drive a test set-up that mimics the extremes of the life of satellites, for example, the Mars rover or to motors that drive a LNG pump whilst submerged in that Liquid Nitrogen Gas from super high-speed motors for testing fuel pumps for jet engines to submerged motors that drive boats in an amusement park or propulsion motors for river and sea vessels Innovation and customization is part of EN motors’s “DNA”!

Custom solution for ultrafiltration At Aqua Nederland 2024 we proudly present our demo model for ultrafiltration with a newly developed ceramic membrane made of silicon carbide at the core. This innovative filtration system, built according to the compact crossflow principle, offers unparalleled performance and efficiency and is designed for water treatment and many other industrial applications. The system has a yield that is no less than two to three times higher than classic technology, has an automatic dirt discharge and can, if desired, be equipped with an automated CIP cleaning system for an extremely long service life. View our ultrafiltration demo model with advanced ceramic membranes at our stand and let us inform you why they are redefining the standards for purity and sustainability.

The pump type CVP "Concrete Volute Pump" is a vertical dry pit pump, single stage with volute pump casing of pre-fabricated concrete material. The CVP have pull-out design rotor. The material of the metal pull-out unit depends on the pump liquid and is available in various materials. The CVP pump is used for intake stations, cooling water, flood control, drainage- and irrigation applications.

Croonwolter&dros supports companies to effectively secure their operational systems. Through a risk inventory, cyber risks are identified and appropriate control measures are defined.

Our range of CYCLESORB® mobile carbon filters is specifically designed to remove contaminants present in water treatment plants, wastewater, and industrial processes. For the treatment of corrosive liquids, suitably adapted CYCLESORB® mobile filters are also available.