Hegawa FastFit Grip Plus Range Couplings, Complete with EPDM gaskets, Stainless Steel Bolts and Nuts, POM (polioxide methylene) gripper elements with steel rivets. Epoxy coated (blue colour) 200 microns. Hegawa FastFit Grip Plus Range Flange Adapters, flanges drilled universal PN10/16, EPDM gaskets, Stainless Steel Bolts and Nuts, POM (polioxide methylene) gripper elements with steel rivets. Epoxy coated (blue colour), 200 microns.

Hegawa FastFit Wide Range Couplings, Complete with EPDM gaskets, Bolts and Nuts Dacromet coated/Stainless Steel. Epoxy coated (blue colour), 200 microns.

Hegawa FastFit Wide Range Flange Adaptors, Flanges drilled universal PN10/16/ANSI, EPDM gaskets, Bolts and Nuts Dacromet coated/Stainless Steel. Epoxy coated (blue colour), 200 microns.

Hegawa FittoSize Grip Couplings (2E/4E) of Hegawa FittoSize Grip Flange Adaptors (2E/4E) for use on steel/ductile iron/PE and PVC pipes

Hegawa Standard FittoSize Couplings, NBR (nitrile)/EPDM/Viton Gaskets, galvanized Bolts & Nuts, galvanized finish.

Hegawa FastFit Wide Range Plus Couplings. Complete with EPDM gaskets, Bolts and Nuts Dacromet coated/Stainless Steel. Epoxy coated (blue colour), 200 microns.

egeplast HexelOne® SLM pipe is a self-reinforced high pressure pipe, a monocomposite only from polyethylene. This reinforcement enables new areas of application in the “raised pressure“ area, in other words, operating pressures above applications previously covered using PE pipes. The reason: It indicates twice as high a strength compared to the previous PE pipes. Product Benefits | Product Structure * Permissible operating pressures of 30 bar for water and 16 bar for gas * Can also be installed trenchless due to protective layer and inner layer of PE 100-RC * DVGW certified * Less connections due to delivery lenghts up to 145 m * Combination of weldings according to DVS: butt welding and electrofusion welding 100% recyclable

Hidrostal HIP pumps are compact screw centrifugal submersible pumps designed for pumping wastewater containing large solids. The pumps are characterized by their large spherical passage, clog-free operation, and excellent quality. The unique screw centrifugal impeller with a large spherical passage ensures clog-free handling of untreated wastewater. Hidrostal is launching a series of 5 HIP pumps. These 3” and 4” submersible pumps come with a standard configuration of materials and motor equipment. Thanks to various adapter pieces, the HIP pumps can be used with the most common base elbows on the market.

The mobile pump set SuperBetsy represents quality, expertise, and innovation. By focusing on engineering, assembly, and quality, we are able to produce our machines at the highest technical level. Collaboration with regional suppliers enables short delivery times, allowing us to quickly provide the best solutions to our customers. Large solid particles, fibers, viscous or challenging fluids such as bentonite and untreated sewage water are no problem for the Hidrostal pump. The clog-free, original screw centrifugal impeller, with a spherical passage ranging from 75 mm to 120 mm, ensures almost uninterrupted operation. The excellent NPSH values, combined with high efficiency, guarantee optimal performance. Thanks to the special design of the screw centrifugal impeller, the pump is safe for small organisms and fish when used for pumping surface water. Combined with a rotary vane vacuum pump and a newly designed vacuum chamber (as well as the use of various sensors), the vacuum system forms the heart of every SuperBetsy. BetsyPrime ensures the safe and reliable transfer of the pumped fluid. The integrated sensor technology minimizes the operating time of the vacuum pump and ensures a long service life. Contamination of the vacuum pump by the pumped fluid is prevented by the innovative sealing system, which is electronically and mechanically controlled.

The new Hidrostal motors are available with drive power from 5 - 170 kW and are suitable for vertical and horizontal installation. Thanks to the design with protection class IP68, the motor pumps can be used in permanent flooded operation, but also in dry installation. The cooling is ensured by an internal energy-efficient cooling circuit. These characteristics make Tuma motors the ideal drive for screw centrifugal pumps to pump unscreened waste water, sludge or other demanding media. In addition to different speeds and voltages various insulation classes and combinations of construction materials are available. Various protection and monitoring elements ensure maximum safety and reliability

Innomotics HV Motors are the perfect choice for virtually any configuration in the power range from 150 KW to 100 MW, with speeds from 7 to 16,000 rpm and torques up to 40,000 kNm. Compliant with IEC and NEMA standards, the motors can be equipped with different cooling systems, explosion-proof protection classes and optional protection levels up to IP66.

General process concept: To achieve an ideal consistency in the raw or mixed sludge prior to the digestion, as a general rule the excess sludge is mechanically thickened before mixing with the primary sludge. The excess sludge thickening reduces the amount of sludge fed to the digestion tank. This yields considerable energy savings and better use of the digestion system, as well as longer retention times in the digestion process. This results in further reduced digested sludge quantities as well as improved dewatering properties thereof. Decanters for thickening are not designed according to the classical counter current principle, but according to the direct current principle. Thanks to this design, the suspension passes through the entire length of the centrifugal chamber in the direction of the discharge. The centrate water runs through channels in the direction of the weir openings. The result is a very long clarification section and thus minimal or no polymer as well as achieving the highest separation efficiencies. Hiller Lysate technology: The HILLER lysate device is attached in the area of the sludge discharge openings and uses the existing kinetic bowl energy. The disintegration effects in the thickened waste activated sludge (WAS) are mainly caused by impact and shear forces generated by the knife blades rotating at high circumferential velocity in the labyrinth and the lysing chamber. The WAS disintegration is carried out in the full flow of the thick sludge that has entered the lysate device; no lysate enters the separated centrate water. Advantages: - Viscosity reduction and better pumping properties at high thickening degrees - Cell disruption increase resulting in an increased degradation of the organic share - Gas yield increase - Improved dewatering behavior

The newly developed DecaSmart compact system series is ready for use immediately for your separation task. HILLER compact units for dewatering, can be put to work on your separation task straight away. In order to be able to offer an optimal solution for different throughput volumes, a DecaSmart of the decanter size DP31 is offered in addition to the current HILLER DecaSmart DP45N. The most significant advantages of the new, compact decanter series, among others, the quick availability for the operator, the simple plug and play integration into the running operation, as well as the attractive price with low operating costs. All process-relevant units are optimally matched to each other and are controlled and monitored via the integrated, user-friendly HILLER switchgear. HILLER systems have always stood for high operational reliability and long service and maintenance intervals. All units and measuring instruments are obtained exclusively from reputable companies with a focus on a long lifetime and maximum operational safety. Advantages: - no planning costs - one contact person - defined, standardised interfaces - easy plug and play integration into the process - low acquisition costs - low space requirement - rapid availability and operational readiness - fast maintenance and spare parts supply - simple handling - mobile applicable

Betrouwbare, niet‑invasieve temperatuurmeting met de iTHERM SurfaceLine TM611, volledig zonder risico op lekkage of procesonderbreking. Dankzij het geavanceerde thermisch koppelingselement biedt de thermometer dezelfde nauwkeurigheid en responstijd als invasieve meetoplossingen. Het modulaire ontwerp maakt snelle en eenvoudige installatie mogelijk, ook in bestaande installaties. De TM611 is ideaal voor veeleisende processen met hoge stromingssnelheden, hoge druk en corrosieve of viskeuze media.